Load data for .45 Glock Auto Pistol + .452 | 118gr | Inceptor ARX Prefered Defense

Recommended Powder(s): Maxam CSB 5

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.452 \| 118gr \| Inceptor ARX Prefered Defense
Bullet Weight:	118gr \| 7.6g
Bullet Diameter:	0.452" \| 11.48mm
Bullet Length:	<<locked>>
Caliber:	.45 Glock Auto Pistol load data
Case Length (l3):	0.759" \| 19.3mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	22.3 Grains of Water \| 1.45 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	18855 psi \| 1300 bar
LID:	LID_B12281_C733
Last updated:	2026-03-25

Load data for 68 loads in caliber .45 Glock Auto Pistol with .452 | 118gr | Inceptor ARX Prefered Defense bullet and 34 powders such as Maxam CSB 5. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	80%	16563	88%	**71	88%
ADI APS 350	<<locked>>	72%	16824	89%	**30	100%
ADI APS 450	<<locked>>	72%	15882	84%	**37	100%
ADI AS 30	<<locked>>	82%	16433	87%	**02	99%
ADI AS 50N	<<locked>>	81%	16665	88%	**25	94%
Accurate Solo 1000	<<locked>>	80%	16331	87%	**86	94%
[Accurate Solo 1250]*	<<locked>>	96%	16839	89%	**42	86%
Alliant BE-86	<<locked>>	95%	16346	87%	**52	90%
Alliant RED DOT	<<locked>>	85%	15824	84%	**15	98%
Baschieri & Pellagri 100	<<locked>>	88%	16447	87%	**06	91%
[Baschieri & Pellagri 102 Pistol]*	<<locked>>	95%	10863	58%	**1	87%
Baschieri & Pellagri 103 Pistol	<<locked>>	87%	16375	87%	**55	93%
Hodgdon Clays	<<locked>>	72%	16911	90%	**43	100%
[Hodgdon HP38]*	<<locked>>	65%	16578	88%	**25	89%
[Hodgdon Universal]*	<<locked>>	89%	16563	88%	**71	88%
[Hodgdon CFE Pistol]*	<<locked>>	92%	16737	89%	**58	86%
[Lovex S011]*	<<locked>>	72%	16766	89%	**96	88%
[Maxam CSB 1]*	<<locked>>	97%	15882	84%	**12	85%
Maxam CSB 2	<<locked>>	97%	13387	71%	**38	90%
Maxam CSB 3	<<locked>>	91%	16447	87%	**38	92%
Maxam CSB 4	<<locked>>	87%	16839	89%	**45	95%
Maxam CSB 5 👍	<<locked>>	81%	16853	89%	**38	100%
[Ramshot Zip]*	<<locked>>	66%	16781	89%	**29	88%
ReloadSwiss RS 12	<<locked>>	93%	16404	87%	**53	97%
Rottweil P 801	<<locked>>	82%	16592	88%	**07	99%
[SNPE Vectan BA 9]*	<<locked>>	85%	16766	89%	**99	83%
SNPE Vectan BA10	<<locked>>	67%	15867	84%	**37	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	89%	16476	87%	**32	86%
Vihtavuori N310	<<locked>>	70%	16462	87%	**25	100%
Vihtavuori N320	<<locked>>	89%	16389	87%	**65	95%
Vihtavuori N32C Tin Star	<<locked>>	95%	9703	51%	**8	96%
[Vihtavuori N330]*	<<locked>>	95%	16781	89%	**88	88%
[Winchester 231]*	<<locked>>	74%	16781	89%	**29	88%
[Winchester AutoComp ]*	<<locked>>	95%	15722	83%	**29	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	64%	11168	59%	**8	80%
ADI APS 350	<<locked>>	62%	13445	71%	**2	100%
ADI APS 450	<<locked>>	60%	11676	62%	**9	99%
ADI AS 30	<<locked>>	60%	9979	53%	**9	92%
[ADI AS 50N]*	<<locked>>	62%	10588	56%	**2	86%
[Accurate Solo 1000]*	<<locked>>	62%	10805	57%	**9	87%
[Accurate Solo 1250]*	<<locked>>	82%	12444	66%	**04	80%
[Alliant BE-86]*	<<locked>>	73%	9993	53%	**2	80%
Alliant RED DOT	<<locked>>	62%	9805	52%	**6	91%
[Baschieri & Pellagri 100]*	<<locked>>	63%	9094	48%	**3	80%
[Baschieri & Pellagri 102 Pistol]*	<<locked>>	81%	8282	44%	**0	80%
[Baschieri & Pellagri 103 Pistol]*	<<locked>>	62%	8746	46%	**3	81%
Hodgdon Clays	<<locked>>	62%	13256	70%	**1	100%
[Hodgdon HP38]*	<<locked>>	61%	14750	78%	**73	87%
[Hodgdon Universal]*	<<locked>>	71%	11168	59%	**8	80%
[Hodgdon CFE Pistol]*	<<locked>>	80%	12749	68%	**33	81%
[Lovex S011]*	<<locked>>	60%	12256	65%	**8	82%
[Maxam CSB 1]*	<<locked>>	86%	12560	67%	**10	81%
[Maxam CSB 2]*	<<locked>>	78%	9311	49%	**5	81%
[Maxam CSB 3]*	<<locked>>	65%	9384	50%	**9	81%
[Maxam CSB 4]*	<<locked>>	61%	9094	48%	**6	85%
Maxam CSB 5	<<locked>>	60%	10066	53%	**2	95%
[Ramshot Zip]*	<<locked>>	60%	14054	75%	**56	85%
[ReloadSwiss RS 12]*	<<locked>>	61%	7890	42%	**9	82%
Rottweil P 801	<<locked>>	61%	9297	49%	**5	91%
[SNPE Vectan BA 9]*	<<locked>>	80%	15040	80%	**50	81%
SNPE Vectan BA10	<<locked>>	61%	13561	72%	**1	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	78%	12923	69%	**27	81%
Vihtavuori N310	<<locked>>	62%	13111	70%	**37	100%
[Vihtavuori N320]*	<<locked>>	61%	8470	45%	**3	83%
Vihtavuori N32C Tin Star	<<locked>>	79%	7252	38%	**3	90%
[Vihtavuori N330]*	<<locked>>	80%	11937	63%	**20	80%
[Winchester 231]*	<<locked>>	61%	11777	62%	**4	81%
[Winchester AutoComp ]*	<<locked>>	88%	13706	73%	**63	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data